Chevy Silverado par de faros delanteros 1500 2500 3500 Hd 03 04 Pickup.

The headlights looked awesome. Only issue is the driver side fit loose so I wrapped electrical tape around the bottom inside clip, and the passenger side I had to do the same plus drill the pin hole out just a little to get the pin to line up. After that it works and fits just fine...that's the reason for the 4 star.

I spent a lot of time polishing my lenses only to have them fade again very soon. It's hard to believe these were cheaper than that a local service that wanted $60 to polish the haziness out of them. Very easy to install although I had to use a drill to enlarge the hinge pin hole. I imagine this is because there are different size hinge pins. I wish I had found these sooner. Chevy Silverado 1500 2500 3500 Hd 03 04 Pickup Headlight Head Lamp Pair

Headlights fit great and initially were great, purchased in January 2016, but now one of the headlights is all fogged up and looks like it has 1,000 little spider cracks all through it. Don't know what the problem is but don't think I will buy these again.

These cost me 60% that getting them at autozone or orielly. I'm not sure there is a difference in quality but I can say that the parts fit well. They look great and were easy to install. I have hid 6000k bulbs I installed in them and the light output seems to have a pretty good cut off. The brightest part of the light out out seems to be right below the oncoming traffics eyes and I don't get people flashing me cause I'm blinding them. Overall I'm pretty happy with them. They didn't take long to send them to me after I ordered them.

These headlights are quite a bargain and I would certainly recommend them to anyone, especially for the price! They may not last as long as the stock units, but at this price point, who can complain!Just be aware, try the retaining pin first and see if you can get them through the holes, if not, DO NOT use a 1/4" drill to ream out the hole. It may be the size of the pin but you'll end up with a loose headlight! Use a smaller drill... I used a number dill a little smaller and only on one hole. It was only some molding flash. The lower retaining tabs may be slightly smaller on these. My stock headlights were a little loose and so are these. The plastic corner assembly slots on the truck get worn which makes the lights shake some. Also, the optics are slightly different on these lights …

Read the other reviews and was impressed. Also read the reviews with only one star and decided to take a chance anyway. They fit perfectly and snug. They make the truck look new again. They feel and look just like the originals minus the fog. My only problem is I thought the lower set where the blinker and daytime running lights are were in good enough shape but these make them look old and shabby so now I will buy those too. I will update this post in 6 months or so with how they are holding up to the elements.Update 03/26/2014Still look new with no problems whatsoever. I am very pleased with this product and highly recomend.

I purchased these lenses for my 2006 Silverado. I was impressed with the speed at which they arrived, as well as the packaging. The lights appear to be of sound construction, and even included replacement bulbs, which I did not expect. The lights are bright and work as well as the OE parts. However, I found two problems with the assemblies that really bother me. First, once installed, the lights do not fit as flush with the edge of the hood as the original lights; if you were familiar with the way the truck looked before you will notice the gap. This was slightly annoying, but my biggest problem was with the mounting tabs on the top of the assembly. The holes in the tabs are too small, by about 1/32th of an inch. You can almost get the locking pin into the holes, but ultimately you will …

Have emailed customer service support 12 times and called cann't talk to customer service about problems.Email takes 1-2 days, for answer, don't answer your question. Won't stand behind defective product sold.I cann't even give a star rating for them. Better to buy locally than get run around.How hard is it to work out a defective issue? I would tell customers to go elswhere if Ketechcann't stand behind products they sell....When you tell 1 person how bad you are treatedword travels fast.